Converters and Power Supplies for the Communications, Automotive & Marine Industries


SEAT MOUNTED READING LIGHT

PVPro-L - THE DISCREET SOLUTION FOR PERSONAL SEAT MOUNTED READING LIGHTS

Achieving the correct ambient lighting in buses and coaches while driving at night can be a challenge. Some passengers may wish to snooze, others might like to read a book or magazine, check and update mobile phones or other media devices.

This causes the dilemma. Lights on or off? At night, typically lights are dimmed and passengers can choose a private reading light, usually situated in the ceiling of the
vehicle which then shines on the appropriate seat, illuminating their surroundings. However, to reach from the ceiling, such lights need to be quite bright. This can
cause annoyance to nearby passengers, as well as a significant rear view distraction to the driver as lights flash on and off while the vehicle is in motion. The Alfatronix
PVPro-L reading light offers the ideal solution. It can be installed in the back of the seat in front. The light ray can be directed to the left or right as well as forward or
backwards for discreet, yet maximum comfort for both the user and their neighbours.

 

PVPro L BG

As it is situated behind the seat, there is no stream of light
from the ceiling, so neither the driver nor other passengers
are distracted. The PVPro-L reading light is designed to
match with our already popular PVPro range of USB chargers. With passenger accessible charging and directable personal lighting, these two products offer a simple and inexpensive offering that significantly enhances customer experience.

Part Number Description Dimensions (mm) Weight 
PVPro-L 12/24 seat mounted reading light Ø37 x 45; Hole Ø30 19g
  For 12/24 Vdc Chargers, please see our ProwerVerter Pro Range.    

 

TECHNICAL DATA 

Input voltage range 9-32Vdc
Output light 500 lux @ 0.25m, 225 lux @ 0.5m
Application Directable reading light for installaion in seat back
Transient voltage protection Meets ISO7637-2 International standard for 12/24V vehicles
Off load current (quiescent current) <2mA @ 12V, 7mA @ 24V
Power conversion efficiency Light on 98mA @ 12V, 48mA @ 24V
Operating temperature -25ºC to +50ºC to meet this specification table
Storage temperature -25ºC to +100ºC
Operating humidity 95% max., non-condensing
Casework Polycarbonate body
Connections Input: 6.3mm push-in flat blade connectors
On/off switch incorporated
Output indicator Blue LED output indication when reading light off
Mounting method 30mm diameter hole with or without bezel
Safe area protection:   
Over heat Limited by temperature sensing circuit
Overvoltage and Undervoltage  Limited by sensing circuit 
Reverse Polarity  Limited by sensing circuit 
Transients Protected by filters and rugged component selection
Catastrophic protection       Internal fuse

Approvals

2014/30/EU The general EMC directive
Regulation 10 The automotive directive
93/68/EEC The CE marking directive
AES5, ECE R118.02 and UL 94: V-0
Designed to EN50498, EN61373 and ISO 7637-2
To fully meet railway approval to EN50155 & EN50121-3-2 the PVPro is to be used in conjunction with a PV6i-R or PV12i-R
Markings CE and E marked
IP Ratings:                         IP30