POWERVERTER PVPro A & C RANGE 12/24Vdc USB CHARGERS

A & C PORT USB CHARGING FOR 12V AND 24VDC APPLICATIONS

The ever-popular PowerVerter PVPro Range of USB chargers has now been updated to include USB-C options, expanding on the great design concepts of USB charging on vehicles. Models are now available offering combined Dual USB-A & C and Single USB-C output versions.

As well as standard (rear fit), all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required.

Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments such as for installation into vehicle walls.

Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB-C models offer higher current outputs for limited charge assistance on tablets and laptops.

Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.

USB 'A' & 'C' CHARGERS AVAILABLE IN IP30 AS STANDARD OR IP65 EXCEPT CONNECTOR

LA GAMA

All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.

Dimensionally the USB A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and the output withstands short circuit current and will return back to full operation when the short is removed.

GARANTÍA

The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.

PVPro-AC and PVPro-ACFf

IP30 USB A & C Chargers

PV65R-AC and PV65R-ACFf (IP65 except connector)

IP65 USB A & C Chargers

PVPWp-C & PVPWp-CFf (IP65 except connector)

IP65 USB C Chargers

PVPro-AC and PVPro-ACFf

IP30 USB A & C Chargers

1/6

A charger-only version is also available for permanent, behind-the-scenes installations without a customer interface, available with a USB-A or USB-C connector. Part numbers are PV-USB2-A and PV-USB2-C respectively. Additionally, we also have a range of rail approved USB chargers.

SAFETY

A requirement of the USB standard is that the metal cage around the USB plugs and sockets is connected to ground (zero volts). If a USB charger is to be used in an application with a positive ground, i.e. battery/supply positive terminal is connected to the vehicle chassis, then there is a risk that the exposed metal cage of any USB cable could come in contact with the positive connected chassis, causing uncontrolled heating of the USB cable and USB charger and potentially creating a hazard. In positive ground applications, we recommend installing an Alfatronix isolated converter between the positive ground supply and the input of the USB charger.